|
|
 |
Model IP-223 Dual IP Remote Adapter Panel
-
Police and Fire Departments
-
Utility and Energy Companies
-
Railroads and Airlines Industries
-
US Forestry and BLM Agencies
-
Emergency responder dispatch vehicles
The Telex IP-223
IP Network remote adapter provides a reliable means of remotely controlling
up to two, two-way-radio base stations. The adapter can be used in
conjunction with the model C-6200 IP console or the C-Soft Windows console.
The IP-233 is interconnected
to the distant remote consoles by means of any available Wide Area Network
(WAN) connection. This could include wireless connections.
The IP-223 provides three
distinct modes of operation.
-
Local Mode - The radio is connected to the IP-223
directly using the same connection pinout as the DSP-223 allows simple
migration.
-
Tone Mode - The IP-223, based on Ethernet traffic,
generates the keytones required to control any tone equipped radio
circuit. This allows an existing radio to be connected and utilize its
existing tone termination panel. This mode also supports a parallel
analog console for local control.
-
Console Mode - This mode allows use of existing tone
based legacy equipment. The IP-223 decodes the tone package from the back
of the console and generates appropriate Ethernet traffic. Ethernet
traffic is also decoded for the console to play. Supervisor and Crossmute
functions are supported.
The IP-233 provides the
following features:
Front Panel:
- 2x16 Backlit
LCD display for all status information
- Line and
Intercom buttons to allow communications with consoles on the network
during radio setup or maintenance
- Front panel
test points and level set potentiometers.
- Local handset
port for intercom back to console operator or PTT of the radio.
Model IP-223 Front View
Rear Panel:
- 2 - DB25
Connectors to the radio provides 7 digital outputs for channel selection,
completely programmable per function tone
- RJ-45
Ethernet connector supporting 10 and 100 Mbps operation
- DB9 serial
port with two active ports for later direct radio control and initial IP
setup
Model IP-223 Back View
System:
- Two PTT modes
and three monitor modes
- PTT & monitor
relays
- Relays can be
placed in either of two groups for separation of function
- CTCSS
generation (64 frequencies)
- F1 and F2
relays (programmable to any frequency or revert to F1)
- Morse Code
encoder for automatic station identification
Specifications
Operating Temperature Range: 0 to
70°C for full specifications
Power Requirements: +12 to +16 Vdc, semi-regulated, 500ma.
Relay Contact Ratings: 1A at 125Vac
Ethernet Speed: 10 BaseT or 100 BaseTX
Non-Relay Outputs: Open collector, active low, 200mA maximum, 40V
collector to emitter voltage
Radio Input Level: 100mVrms to 16Vrms, adjustable
Radio Output Level: 10mVp-p to 9Vp-p for mic level or -40 to +10dBm
into 600W load, adjustable
Radio Lines: 2W and 4W support
Radio Interface: ±45 Vdc withstand rating
Radio Output Impedance: 600W for balanced mode, 200W for single
ended mode
Frequency Response: ±1.5 dB, 300 to 3000 Hz
Audio Distortion: 2% THD maximum
DTMF Detection Bandwidth: ± 25 Hz around center of frequency
Front panel operations:
- 2x16 Display for all operations
- ACCESS TO TEST POINTS
- Level adjustment Potentiometers
- INTERCOM Button
- Active Line select button
- Handset connector
Options:
- 19 inch rack mount kit, can accommodate 2
IP-223 adapters
- PTT handset
Warranty (Limited)
All Telex signaling products are guaranteed
against malfunction due to defects in materials and workmanship for three
years, beginning at the date of original purchase. If such a malfunction
occurs, the product will be repaired or replaced (at our option) without
charge during the three-year period, if delivered to the Telex factory.
Warranty does not extend to damage due to improper repairs, finish or
appearance items, or malfunction due to abuse or operation under other than
the specified conditions, nor does it extend to incidental or consequential
damages. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation may not apply to you. This
warranty gives the customer specific legal rights, and there may be other
rights which vary from state to state.
|
 |
